Top Products

DKC02.3-040-7-FW

DKC Drive Controllers

The DKC02.3-040-7-FW is a high-performance AC drive controller manufactured by Bosch Rexroth Indramat. This unit features standard firmware. The current rating of the device is 40 A. The DKC02.3-040-7-FW drive controller features multiple communication interfaces: RS232/485, Analog, and a DKC02.3-LK-SCK02 option card for SERCOS interface.

/buy/bosch-rexroth-indramat/dkc-series/dkc023-040-7-fw

TVD 1.3-15-03

TVD Power Supply Modules

In-Stock, Ships Today

TVD 1.3-15-03 is a power supply module. It supplies regulated DC output. The DC bus voltage is 320 Volts DC.

/buy/bosch-rexroth-indramat/tvd-series/tvd-13-15-03

DKC11.3-040-7-FW

DKC Drive Controllers

In-Stock, Ships in 3 Days

The servo drive controller DKC11.3-040-7-FW features a three-phase AC input voltage of 380 - 480V and a rated current of 40 A. It has a compact design and high power density. The unit DKC11.3-040-7-FW provides two different communication interfaces such as Analog and RS232.

/buy/bosch-rexroth-indramat/dkc-series/dkc113-040-7-fw

VCP08.2DTN-003-SR-NN-PW

VCP IndraControl Terminals

In-Stock, Ships in 3 Days

VCP08.2DTN-003-SR-NN-PW is an operator pane. It is equipped with a display and keypad. The display size is 3.8 inches.

/buy/bosch-rexroth-indramat/vcp-screen-panel-series/vcp082dtn-003-sr-nn-pw

HMV01.1R-W0045-A-07-NNNN

HMV IndraDrive Supply Units

In-Stock, Ships Today

The HMV01.1R-W0045-A-07-NNNN from Rexroth Indramat operates with a rated input voltage of 3 x AC 380-480 V. It provides an output current of 60.0 A, ensuring efficient power control.

/buy/bosch-rexroth-indramat/hmv-series/hmv011r-w0045-a-07-nnnn

VT-HNC100-1-23/W-08-P-0

VT-HNC Digital Axis Controllers

In-Stock, Ships Today

The VT-HNC100-1-23/W-08-P-0 digital axis controller is manufactured by Bosch Rexroth Indramat. This unit falls in the 1X 10 to 19 component series, a version for 1 hydraulic axis. Bus connection and installation specifications are factory assigned and unique to each unit.

/buy/bosch-rexroth-indramat/vt-hnc-series/vt-hnc100-1-23-w-08-p-0

HVE02.2-W018N

HVE Power Supply Units

In-Stock, Ships Today

HVE02.2-W018N is a power supply module. It converts AC to DC output. Its housing is IP10 rated.

/buy/bosch-rexroth-indramat/hve-series/hve022-w018n

6410-001-C-N-N

6410 Stepper Drives

In-Stock, Ships Today

6410 Series Stepper Drive manufactured by Pacific Scientific. This Stepper Drive features a Power Level of 7.1 A peak, 5 A rms 24-75 Vdc along with a Customization Number of Standard Unit.

/buy/pacific-scientific/6410-series/6410-001-c-n-n

MKD071B-061-KP1-KN

MKD Synchronous Motors

In-Stock, Ships Today

Bosch Rexroth's MKD071B-061-KP1-KN motor ensures optimal control with a peak current of 50.4 A and rotor inertia of 8.7 x 10-4 kgm^2. Its 13.2 A continuous current highlights its efficiency in high-demand tasks.

/buy/bosch-rexroth-indramat/mkd-series/mkd071b-061-kp1-kn

EEA-PAM-535-D-32

EEA-PAM-5**-D-32 Power Amplifiers

In-Stock, Ships Today

Power Amplifier with PID Module manufactured by Vickers. This EEA-PAM-535-D-32 Card is For Proportional Valve KF*G4V-5 and has a Power (Input) Supply of 24V DC.

/buy/vickers/eea-pam-5**-d-32-series/eea-pam-535-d-32

MHD071B-061-PG1-UN

MHD Synchronous Motors

In-Stock, Ships Today

The MHD071B-061-PG1-UN synchronous motor offers precise motion control with continuous torque output ranging from 8 to 12 Nm. Its rated speed varies between 4000 and 5000 rpm depending on the cooling method.

/buy/bosch-rexroth-indramat/mhd-series/mhd071b-061-pg1-un

MSK076C-0300-NN-S1-UP0-NNNN

MSK IndraDyn S Synchronous Motors

In-Stock, Ships Today

Rexroth's MSK076C-0300-NN-S1-UP0-NNNN servo motor is built for industrial automation. It features a rotor inertia of 0.00430 kgxm^2 and a maximum current of 32.4 A. Its four pole pairs ensure efficient performance.

/buy/bosch-rexroth-indramat/msk-series/msk076c-0300-nn-s1-up0-nnnn

EK1100

EK1xxx EtherCAT Couplers

In-Stock, Ships Today

The EK1100 by the manufacturer efficiently integrates EtherCAT Terminals into 100BASE-TX networks. It offers a data transfer rate of 100 Mbit/s and operates within temperatures from -25 degrees C to +60 degrees C.

/buy/beckhoff/ek1xxx-ethercat-coupler-series/ek1100

CSB02.1B-ET-EC-NN-S4-NN-NN-FW

CSB Drive Controllers

In-Stock, Ships in 3 Days

The Bosch Rexroth CSB02.1B-ET-EC-NN-S4-NN-NN-FW servo drive integrates Ethernet-based communication for high-speed data transmission and supports TTL and Resolver encoders. Its Safe Motion technology ensures integrated safety in dynamic industrial automation systems.

/buy/bosch-rexroth-indramat/csb-series/csb021b-et-ec-nn-s4-nn-nn-fw

AKD-P00307-NACN-0060

AKD Servo Drives

In-Stock, Ships Fast

The AKD-P00307-NACN-0060 is manufactured by Kollmorgen as part of the AKD Servo Drive Series. These drives are fast, and flexible drives with features such as a drive continous output power of 2000 Watts and a rated supply voltage of 240/480 V. As well as, Rated output current of 3 A and a peak output current of 9 A. AKD drives offer the greatest output in a compact body.

/buy/kollmorgen/akd-servo-drive-series/akd-p00307-nacn-0060

See Product »

A Global Supplier of Industrial Electronics

1-919-443-0207 1-888-551-3082 sales@wakeindustrial.com

Search Our Inventory:

Top Products

What we offer

Buy Our Parts

Repair Your Equipment

Purchase Your Surplus

All Manufacturers

We move fast. We ship fast.

Wake Industrial Is Trusted By

Navigation

Terms & Policies

Contact Us