CP3918-1001-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
The Beckhoff CP3918-1001-0000 is part of the CP Panel PC Systems series and features an 18.5 inch PCT multi-touch display with a resolution of 1366 x 768 in a 16:9 aspect ratio. This panel PC offers an IP65 protection rating, supports a supply voltage of 22-30 VDC, and can operate in temperatures from 0 to 55 degrees Celsius. It has a 4-pin M12 power connector, a shock resistance of 5 G for 30 ms, and a typical weight of 5.5 kg with connection block.
Internal Product Review
The CP3918-1001-0000 is a Beckhoff panel PC featuring an 18.5-inch display and PCT multi-touch operation for efficient HMI use. A 1366 x 768 resolution in a 16:9 format supports clear process visualization and a clean interface layout. IP65 protection makes the panel PC a dependable choice for industrial panel applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP3918-1001-0000 is a Panel PC manufactured by Beckhoff and part of the CP Panel PC Systems series. It combines an industrial computer, widescreen display, and touch interface so visualization, recipe management, and motion commands can be executed at the machine level without an external PC. Typical mounting is on a support arm or directly on a cabinet door, putting the operator station close to conveyors, fillers, or packaging equipment where immediate feedback is required.
The front panel carries an 18.5 in diagonal screen that follows the widescreen 16:9 aspect ratio and renders graphics at 1366 × 768 pixels, giving clear status pages and trend charts. Input is registered through a PCT Multi-Touch layer that recognizes multi-touch gestures even when operators wear thin gloves. Internal electronics are supplied from a stabilized bus between 22-30 VDC; power is fed through a 4-pin M12 socket that locks against vibration. Remote graphics are possible because both the DVI-D and USB-E interfaces can bridge 50 m to a control cabinet, allowing the display head to be situated on moving gantries while the drive hardware stays stationary. The connection block weighs 5.5 kg, so a light-duty arm is adequate for installation.
An aluminum housing with a front-side rating of IP65 blocks dust and water jets, permitting washdown use in food-processing or chemical areas. The unit operates from 0 to +55 °C and can be stored from −20 to +65 °C, helping it tolerate unheated warehouse conditions. The display endures mechanical shocks up to 5 G, 30 ms and continuous sinusoidal vibration of 0.5 G between 58 and 500 Hz, so it can be mounted on presses or indexing tables without protective isolation. The sealed power connector and remote-display arrangement support decentralized HMI placement on mobile carts, overhead tracks, and floor-standing machines.
