MTC-P01.2-M1-NN-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911280638
The Bosch Rexroth Indramat MTC-P01.2-M1-NN-NN-NN-FW is part of the MTC200 CNC Modules series and features main memory of 1 MB. The module measures 140 mm in height, 280 mm in length, and 131.5 mm in width. It supports up to 8 drives and 4 interpolating axes.
Internal Product Review
The MTC-P01.2-M1-NN-NN-NN-FW is an MTC200 CNC module that stands out for support of 4 interpolating axes and up to 8 drives. ISA bus architecture and 1 MB main memory make the module a practical fit for established CNC control platforms. A minimum 8 ms power-fail time is a valuable performance detail for stable machine operation.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MTC-P01.2-M1-NN-NN-NN-FW is a numeric control module produced by Bosch Rexroth Indramat for use in the MTC200 CNC Modules series. It functions as the central processor that coordinates axis interpolation and drive communication inside machine tools and automated production cells. It links motion commands from the operator interface to individual drive amplifiers and feedback devices.
The module is equipped with 1 MB of battery-buffered main memory for part programs and parameter tables, and it can address up to 8 drives through the SERCOS fiber link while simultaneously calculating motion profiles for 4 axes. Program execution is handled across the ISA Bus, so retrofit controllers can share a backplane with standard PC cards. The NC-ready input accepts a 24 V signal and is internally limited to 24 V maximum at 150 mA; this line is used by the PLC to enable motion processing once peripheral conditions are met. Optical transmission allows a maximum link attenuation of 12.5 dB, with transmitter output no lower than -7.5 dBm and receiver sensitivity down to -20 dBm to maintain telegram integrity over typical cabinet-to-drive distances. A 50-way SPS ribbon cable connects discrete I/O to the module, and the screw terminals that secure it must not be tightened beyond 0.8 Nm.
The housing stands 140 mm high, extends 280 mm deep, and measures 131.5 mm wide, allowing installation in 19-inch racks without restricting airflow to adjacent electronics. During a line power dropout, the controller sustains logic power for at least 8 ms, enough time for the drive group to detect the fault and bring axes to a controlled halt. Idle consumption on the NC-ready circuit is 150 mA, so cabinet power supplies must size this branch accordingly. Fiber connectors are factory-aligned, and the optical link must remain within the stated transmit and receive thresholds.
