Linear Servo Motors

The Linear Servo Motors series provides precise motion solutions that include flat type, dual magnet type, and center magnet type, all made with cores for better work. For the flat types, the thrust forces go from 140N to 340N, and the rated speeds can hit 2.3 m/s. The dual magnet models give harder pushes from 610N to 800N along with reaching speeds happen up to 3.0 m/s. These motors come with a smaller design using new, light coils, and this gives 7% quicker max speeds than older models. Smaller units can push up to 270N, but bigger ones can do 2200N. Depending on the chosen setup, the magnetic forces range between 350N to 2700N. This series is better with power, as it cuts power waste by 10%, which also keeps heat down and stops parts from growing because of heat; this keeps them exact when running. Because they don't change much with heat, these motors are perfect for jobs that need to stay on target for a long time. An important design keeps errors appearing because of heat. The modular rail setup lets people put things according to lengths like 64mm, 128mm, 256mm, and 512mm. The magnet rail mass varies; lighter ones are 0.1kg, and heavier ones are 11.1kg, again depending on how long and what type it is. Install sizes are made exact; they have the same measured space and normal places to screw things, and that makes putting them in easy.