Product Description:

The DD035CC2ANEA100 is a moving-coil assembly manufactured by Sanyo Denki for its Linear Servo Motors series. Designed for direct-drive positioning stages, the unit produces linear force without mechanical transmissions, enabling precise acceleration and repeatable stops in semiconductor handlers, pick-and-place gantries, and other industrial automation axes. A built-in Hall sensor supplies coarse commutation signals to the drive controller before high-resolution feedback takes over, supporting smooth startups and stable low-speed movement.

During continuous operation, the coil delivers a rated thrust of 610 N while translating the carriage at a rated speed of 2.0 m/s. These figures apply when the windings are energized from a 200 VAC supply and kept within the recommended thermal range. The moving element weighs only 5.0 kg, limiting inertia so the axis can reverse quickly and reducing reaction forces on the machine base. A winding stack length of 253 mm concentrates magnetic flux across the mating magnet track, providing uniform force density along the stroke and minimizing cogging during fine position corrections.

For peak moves, the motor can generate up to 1400 N of short-term thrust, and its electromagnetic circuit supports traverse speeds up to 3.0 m/s before back EMF approaches the drive limits. Static attraction to the magnet rail is held at 350 N, a load that must be absorbed by the linear guides during installation. The coil face measures 105 mm wide and 70 mm high, and it mates with a 35 mm magnet plate so the assembly fits compact Z-axes. A 300 mm preterminated cable simplifies routing. The unit uses a standard winding and does not include internal thermal protection, so temperature monitoring must be handled by external sensors.