Product Description:

The DS045CC1ANAA200 is a coil unit in the Linear Servo Motors series produced by Sanyo Denki for precision positioning on gantry stages and pick-and-place axes. As a flat-type primary part with an iron core, it generates thrust directly along the track without rotary-to-linear conversion, allowing compact installation where only 48.5 mm of height is available. When paired with its dedicated magnetic rail and a 200 VAC drive, this product supplies the continuous linear force required to move loads in automated inspection, packaging, and electronics assembly equipment.

The coil is designed for a supply of 200 VAC from a drive that can deliver up to 30 A of phase current. Under these conditions, it produces a rated thrust of 260 N while sustaining a rated speed of 1.8 m/s, so work can be performed at a constant velocity with limited heat rise. The frame width measures 65 mm, providing enough surface area for mounting while keeping the moving mass low. A cable set that extends 600 mm from the housing carries power and temperature leads back to the amplifier. The active coil length of 130 mm combines with a motor volume of 4.10 × 10⁵ mm³ to balance thermal dissipation and magnetic loading. During continuous operation, the 48.5 mm height helps align the thrust axis close to the load center to minimize pitching moments.

For dynamic moves, the motor can reach a peak thrust of 500 N and a maximum speed of 3.0 m/s. Magnetic attraction to the track is 1700 N, so the linear guides must withstand this preload. The moving element weighs only 1.8 kg, reducing inertia and allowing fast acceleration. No Hall sensor is installed, so commutation relies on the position feedback device mounted elsewhere in the stage. Thermal protection circuitry is not embedded, so overheating must be managed by the drive’s alarm functions or external sensors.