DS045CC1ANAA100 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki DS045CC1ANAA100 is part of the Linear Servo Motors series and features a maximum thrust of 500 Newtons and a peak speed of 3.0 meters per second. This servo motor has a coil length of 130 millimeters, a coil mass of 1.8 kilograms, and a rated thrust of 260 Newtons. It is designed with an amplifier capacity of 30 Amps and has a motor width of 65 millimeters and height of 48.5 millimeters.
Internal Product Review
The DS045CC1ANAA100 is a Sanyo Denki linear servo motor with a compact motor package and a rated thrust of 260 N. A max thrust of 500 N paired with 3.0 m/s max speed makes this model a very capable choice for fast, force-intensive linear motion.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DS045CC1ANAA100 is a coil unit from the Linear Servo Motors series manufactured by Sanyo Denki for direct-drive positioning systems that require fast, accurate linear motion without a rotary-to-linear transmission stage. When paired with its corresponding magnetic track and a servo amplifier, the coil develops controlled thrust along the machine axis. This arrangement allows pick-and-place gantries, semiconductor steppers, and precision stages to move loads with tight positional repeatability while avoiding the backlash associated with mechanical transmission components.
The drive section must supply up to 30 A of phase current, providing the winding with the current needed to generate peak thrust within its operating limits. A coil length of 130 mm provides sufficient active copper for continuous duty while keeping the overall mass at 1.8 kg, allowing rapid acceleration profiles. The maximum travel velocity reaches 3.0 m/s, and the coil can deliver transient force peaks of 500 N. The rated operating points are 1.8 m/s and 260 N, establishing the continuous operating range that balances thermal rise with force output. Because the coil has no Hall sensor, commutation relies exclusively on position feedback from an external linear scale. This arrangement simplifies the coil housing and eliminates Hall sensor wiring.
The magnets apply an attraction force of 1700 N to the coil, so mechanical fixtures must withstand this load during installation, maintenance, and operation. The assembly measures 48.5 mm in height and spans 65 mm across the mounting face. Its volume is 4.10 × 10^5 mm³, allowing multiple carriages to be placed side by side or the motor to be installed beneath low-profile slideways. Magnetic loading is applied symmetrically along the yoke, helping the housing maintain flat contact with the guiding surface. The mounting arrangement must preserve the required 0.5 mm air gap throughout the complete stroke to prevent contact between the coil assembly and magnetic track.
