DS025CC1ANAA200 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The DS025CC1ANAA200 linear servo motor delivers a rated thrust of 140 Newtons, a maximum thrust of 270 Newtons, a rated speed of 2.3 m/s, and features a coil mass of 1.1 kilograms. Part of the Linear Servo Motors series by Sanyo Denki, it operates without a hall sensor and generates a magnetic attraction force of 940 Newtons.
Internal Product Review
The DS025CC1ANAA200 is a standard coil model under the Sanmotion G series manufactured by Sanyo Denki. Together with a compatible magnet rail model under the same series, this unit is appropriate for generating precise linear motion.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DS025CC1ANAA200 is a robust and versatile linear servo motor manufactured, engineered, and produced by Sanyo Denki for automation and servo applications. As part of Sanyo Denki’s G Sanmotion series, the DS025CC1ANAA200 exhibits a flat-type construction with a magnetic core. To operate properly, the DS025CC1ANAA200 must be paired with a compatible magnet rail model and servo amplifier. The magnetic rail model acts as the pathway for the coil during operation. This device is designed to achieve a rated thrust force of 140 N at 2.3 m/s. Although this unit can only generate motion on a fixed axis, the forcer can go both ways at any time. With an excitation voltage of 200 VAC, the coil achieves a magnetic attraction force of 940 N.
The DS025CC1ANAA200 has a total mass of 1.1 kilograms and a length of 130 millimeters. It works well with DS025MCXXX magnet rails manufactured by Sanyo Denki under the same Sanmotion G series. Throughout its operation, the maximum thrust force may vary depending on the speed. As the speed increases from the rated speed, the maximum thrust force attainable by the forcer decreases. To mount the DS025CC1ANAA200 effectively, at least three M5 screws must be used. The motor comes with mounting screw holes spaced 36 millimeters apart.
As mentioned earlier, the DS025CC1ANAA200 requires both a magnetic rail and a servo amplifier to operate properly. The servo amplifier for this unit, however, must have a sufficient capacity of at least 20 A. The servo amplifier is usually connected to a controller unit with small signals that depend on the state of other machines or units in the system. The servo amplifier magnifies the small signals from the controller to run the DS025CC1ANAA200.
