SERVOSTAR-603 is a digital servo amplifier manufactured by Kollmorgen, a reliable company that has been on the market for decades. As for this product, it is a part of the Servostar 600 series, and it is an amplifier you can count on in all occasions.
It is the standard 603 model, which was designed to be used as an integrated component of machines and other forms of electrical equipment. You can connect it directly to the grounded three-phase industrial mains supply networks. Users can utilize amplifiers in business or residential premises, but the manufacturer advises extra filter measures in that case.
Keep in mind that you should only use these amplifiers to drive servo motors that are synchronous, brushless, and have a DC bus link voltage at least as big as the amplifier.
The model measures 275 x 265 x 70 mm without connectors. It weighs around five pounds (2.5kg). The rated DC bus link voltage goes from 290 to 675V while the rated output current is 3A, but keep in mind that there is a possibility to vary up to 3%.
SERVOSTAR-603 has overvoltage protection with the maximum limit set at 900V. The minimum load inductance is 12mH while the maximum is 75mH. The recommended torque for connectors from X series is 0.5 to 0.6 Nm, but it climbs to 3.5 Nm if you use a ground bolt.
The amplifier has an LED display screen that shows his status. You can check the function and parameter numbers on the front panel, which will also display an error message in case an issue appears. That will make it easier to solve any problem.
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned
or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized
distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands
appearing herein are the property of their respective owners.
Copyright 2021 - Wake Industrial - All Rights Reserved