COVID-19 Update: Wake Industrial is open and available to support your automation needs.

S6001

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
Danaher Motion Industrial Devices Drive6A 1 Axis Microstep

S6001

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
Danaher Motion Industrial Devices Drive6A 1 Axis Microstep

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Exchange
Call to find out about our exchange credit for your defective unit.
Sell Us Your Surplus
Have a S6001 to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The S6001 is a Kollmorgen single-axis micro-stepping drive. It is a 6 amp, bipolar, 160VDC, the recirculating drive that can run 2 phase hybrid step motors. Built by Kollmorgen you can expect high amounts of reliability along with top quality motor performance that is never compromised. Expect this micro-stepping drive to be easy to use and to provide your operation with exceptional value.

The axis on the S6001 is an independent axis. The unit is compatible with a number of different indexers or motion controllers. These will help to provide counterclockwise as well as clockwise step pulses and also to generate direction signals and step signals.               

The S6001 micro-stepping drive can manage permanent magnet hybrid step motors with a two-phase design and with 4, 6 or 8 leads. It can operate with linear actuators, precision gear motors and step motors between 17 and 42 frame. The unit features advanced anti-resonance circuitry which almost completely eliminates mid-range instability. This feature also helps to improve the motor’s usable torque immensely.

The S6001 model uses airflow cooling and so it should be mounted with enough clearance to allow for a fan kit if airflow will be marginal. Ensure the unit is mounted so that the heat sink fins are vertical so that all convection currents can flow along the unit’s fins. The S6001 has a vertical clearance of other surfaces and equipment and should have a minimum of 4 inches of clearance from these. The horizontal recommended clearance is 2 inches. Do not mount equipment below the S6001 which is heat generating. If necessary an airflow system can be installed to keep ambient temperatures below 35°C.