Indramat Rexroth Okuma & Pacific Scientific Automation Reseller | Wake Industrial

Wake Industrial in text next to a stylized W resembling a wrench

20 September, 2023

clearing_indramat_codes_blog

Indramat error codes may appear to be worrying and can make you apprehensive. However, these codes are an essential aspect of a motion control system from the manufacturer. They inform the operator about problems with various system parts, such as the drive, motor, controller or even cables. These faults tend to get triggered because of improper use, incorrect parameters or issues related to system hardware or software. Some error codes cause the associated machinery to shut down completely. This is done ...

20 September, 2023

dkc_replacement_blog

Indramat was well-known for its motion control systems. The manufacturer had a wide range of products to its credit, including the DKC series of servo drives. Ever since the company ceased operations in 2001, the manufacturer’s parts have been considered to be legacy parts. DKC servo drives are available in different power ratings. While new ones are no longer available when a replacement is needed, you can procure refurbished or remanufactured drives. DKC Servo Drives Fault CodesSome errors encountere...

5 September, 2023

DKC_E831_Error_Blog

The Indramat E831 error code is associated with one of the several E errors of a DKC drive controller from Indramat and occurs when the drive has an IN REFERENCE setting and the position limit monitor is tuned ON. The manual for this drive refers to this error as “Position limit reached during jog”. In simple terms, this error is encountered when there is a communication fault between the control unit and the drive. While the drive does not shut down as soon as this error is encountered, it must...

5 September, 2023

78_error_blog

The Indramat 78 error code is associated with a drive controller of the DDC, MDD, DDS or DKS series from the manufacturer. The H1 status indicator of these drive controllers is designed to display only a two-digit code, unlike the four-character code highlighted by the ECODRIVE drive controllers, where the corresponding error is F878. This is a critical error and must be looked into and addressed immediately to resume the system's operation without any hindrance. The error code 78 is represented as a velo...

5 September, 2023

f408_error_blog

Indramat was a pioneer in the manufacture of motion control and industrial automation systems. These include servo drives, servomotors, drives, interface cards and a lot more. Although the manufacturer’s interface cards are renowned for their excellent and accurate performance, errors are inevitable. The F408 error code is associated with a fatal or critical error of the Fieldbus interface card that stops it from functioning properly. When this error is encountered, the drive shuts down immediately, and...

5 September, 2023

power-supply-issue-causes

An Indramat power supply module is an integral aspect of a motion control system. This module is responsible for delivering the drives in your system with the required power. Hence, if a power supply fails to function properly, the motion control system will not function as intended. A power supply problem can pave the way for several other problems. When this problem is identified and corrected, the system will continue rendering smooth operation. Hence, you must ensure the power supply module is functio...

4 September, 2023

Indramat-E281-F281-blog

Indramat products are associated with various error codes to ease their troubleshooting. Each code is associated with a specific problem. E-codes are warning error codes and are used to indicate actions that must be performed as soon as possible for uninterrupted operation. On the other hand, F codes are more serious and shut down the system immediately until they are cleared. The E281 and F281 error codes are associated with a mains or power supply fault. The E281 error code indicates that there is a pro...

4 September, 2023

indramat-component-blog-1

Indramat control is the most essential part of a motion control system. Like any other Indramat product, the control is known for its ruggedness and excellent performance. Once installed and used properly, it can operate for up to three decades without any problem before it needs a repair or replacement. There are several types of Indramat controls. Each control is designed for a specific purpose. Hence, it is necessary to have a clear understanding of the control that is deployed in the motion control sy...

31 August, 2023

f269_f630_errors

F629 and F630 are two error codes associated with the ECODRIVE DKC range of drives from Indramat. These are considered detrimental to the drive operation and must be addressed as soon as they are encountered. They are collectively referred to as travel range errors and are identical but for one major difference. One of the error codes is associated with a positive travel range, whereas the other is associated with a negative travel range. A travel limit indicates the position boundaries for the safe operat...

31 August, 2023

indramat-indradrive-blog

Indramat manufactured its drives under the brand name Indramat until Rexroth acquired the company. Indramat drives were majorly electric. Following the acquisition, the drive range extended to include Rexroth's pneumatic and hydraulic drive options. Subsequently, when Indramat became a part of Bosch Rexroth, the drives were branded or referred to as IndraDrive. Indramat drives are no longer being produced as the company no longer exists, and the last set of Indramat products were manufactured over two dec...

Showing 51 to 60 of 133 entries

‹
1
2
...
5
6
7
...
13
14
›

Request a Quote

Contact Us

Call: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204

Email: sales@wakeindustrial.com
Address:

1620 Old Apex Rd

Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.

Copyright 2024 - Wake Industrial - All Rights Reserved