Product Description:

The MSM030C-0300-NN-M0-CC0 is a synchronous motor produced by Bosch Rexroth Indramat in the MSM IndraDyn S Synchronous Motors series. It delivers controlled rotary motion for light-duty axes in packaging equipment, electronics assembly, and small handling modules where servo precision and compact dimensions are required. Its mechanical envelope follows the 030 frame class, giving the motor low inertia for quick position changes without placing excessive load on the transmission. That layout suits compact axes where moving mass must stay low and response must remain predictable over short travel distances.

Heat generated in operation is carried away by natural convection, so no auxiliary fan or liquid circuit is needed for cooling. Power, feedback, and protective earth conductors exit through a cable tail, which helps when space behind the motor is limited. Rotor position is resolved by a multiturn absolute encoder, allowing the control system to recover shaft position after a power loss without rehoming. The unit is supplied without a holding brake, so static load restraint must come from the drive or an external locking device. Because no brake is installed, vertical or suspended loads need a separate holding method when power is removed. Frame designation 030 matches the flange pattern and shaft height used for other motors in this family.

Overall depth corresponds to Motor length C, which gives a mid-range housing that balances continuous torque capability with low mass for gantry or pick-and-place heads. Electromagnetic behavior comes from winding code 0300, with resistance and inductance values suited to low-voltage IndraDrive controllers and rapid current rise. The combination supports fast acceleration while helping limit thermal rise under rated duty. This body length can fit moving assemblies that need a short motor while still providing usable continuous output for repeated cycles. That balance is useful on axes with frequent start-stop motion.