Product Description:

The MSM030C-0300-NN-C0-CC0 is a compact servo unit manufactured by Bosch Rexroth Indramat and supplied in the MSM IndraDyn S Synchronous Motors series. As a synchronous motor, it converts drive current from an IndraDrive controller into precise rotary motion for positioning tables, pick-and-place heads, and small tooling spindles in automated equipment. Its low rotor inertia supports quick response during short indexing moves, and its mounting interface suits compact machine layouts where accurate closed-loop motion is required. This type of motor is commonly used in packaging, handling, and assembly equipment where repeatable starts and stops are necessary.

The motor uses a molded cable tail, so power and feedback leads can pass through tight machine spaces without extra connectors. Rotor position is provided by an incremental encoder, which supports accurate speed regulation and stable position feedback for the connected drive. Cooling is handled by natural convection, so heat leaves through the housing surface without a separate fan or liquid circuit. The fixed lead outlet also helps when the motor is installed in narrow housings or alongside guide rails, because there is no separate connector body extending from the frame. The unit is supplied without a holding brake, so any load that must remain in place during power loss needs an external mechanical restraint or drive-controlled holding torque.

The motor has a length code of C, which indicates the longer housing option in this frame size. Its frame size is 030, giving it a compact flange and shaft height suited to small-axis installations. The longer active section provides more magnetic length than shorter frame lengths in the same size, which helps support steady continuous torque in a limited space. Winding code 0300 sets the electrical characteristics used by the matching drive, and the motor reaches its rated speed when operated from 320 VDC link supplies.