10.F5.C1B-2A0A KEB 21.6 Amp 230 Volt Axis Drive
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 10.F5.C1B-2A0A is part of the F5 Combivert Axis Drives series and supports either single or three-phase 230 V AC input with a maximum current of 21.6 Amps. This drive offers 8 digital inputs, 2 analog inputs with 12-bit resolution, and features 2 relay outputs rated at 30 VDC and 1 Amp. It comes equipped with a braking transistor, is enclosed in an IP20-rated housing, and delivers up to 3 horsepower motor power.
Internal Product Review
The 10.F5.C1B-2A0A is a KEB F5 Combivert axis drive with 230 V AC input and an IP20 enclosure. Support for 1-/3-phase input and a 10 A rated current gives the drive flexible integration in demanding motion systems. A built-in braking transistor and 800 Hz maximum output frequency make this model especially appealing for responsive axis control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 10.F5.C1B-2A0A is an inverter drive produced by KEB for the F5 Combivert Axis Drives series. In a control cabinet, it interfaces with PLC I/O and modulates motor voltage and frequency so that conveyors, pumps, or indexing tables receive only the torque they need. By replacing mechanical throttling with electronic speed control, the drive improves energy usage and extends component life on production equipment. Its design supports both single-phase and three-phase supply networks, allowing the same unit to be used across small stand-alone machines or larger multi-axis installations.
The power section is intended for a nominal line of 230 V AC. Under this supply, it can deliver a maximum output current of 21.6 A, giving headroom for acceleration transients beyond the continuous rating of 10 A. Motor frequency can be adjusted up to 800 Hz, and the IGBT bridge can switch at carrier frequencies up to 16 kHz for noise-sensitive environments. An IP20 open-frame enclosure means the unit must be mounted inside a protected cabinet, but it allows heat exchange through natural airflow. The built-in braking transistor dissipates regenerated energy when the motor decelerates, and an external 24 V DC source keeps the control electronics active during mains outages to preserve fieldbus communication and parameter memory.
The drive supports motors up to 3 HP, and its two analog inputs accept speed or torque references with 12-bit resolution. It also has eight digital inputs for start, jog, or function selection. Status signaling is available through two digital outputs with a combined load of 50 mA, while two relay channels rated at 30 VDC / 1 A provide isolated fault or ready contacts. Size code 10 matches the module's physical outline to standard F5 backplanes, which helps the drive fit standard cabinet layouts.
