13.F5.C1E-160A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 13.F5.C1E-160A is part of the F5 Combivert Axis Drives series and has a rated power output of 5.5 kW with a nominal input voltage of 230 V AC. It features 8 digital inputs, 2 analog inputs and outputs, and comes with 2 relay outputs. The drive is housed in an IP20 enclosure and supports a maximum current of 43 A.
Internal Product Review
The 13.F5.C1E-160A is a KEB F5 Combivert axis drive rated for 5.5 kW at 230 V AC. Three-phase input architecture and 24 A nominal current support stable motor control in demanding motion applications. IP20 enclosure protection and an integrated braking transistor make the drive a strong choice for compact industrial axis systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 13.F5.C1E-160A is an axis drive produced by KEB within the F5 Combivert Axis Drives series. It functions as a variable-frequency inverter between a three-phase mains supply and an induction or synchronous motor, allowing speed, torque, and direction to be regulated by a PLC or motion controller. By converting fixed-frequency AC into a modulated output, the unit supports conveyors, packaging machines, and other motion-focused equipment used on the plant floor. The output stage adjusts voltage and frequency together so the connected motor can respond smoothly to changing load and speed commands.
The drive accepts a three-phase input at 230 V AC. A separate control circuit requires 24 V DC, which isolates logic power from the mains section. Under continuous duty, the inverter delivers 5.5 kW, while the power section carries 24 A of nominal motor current and can reach a peak of 43 A during acceleration. An internal IGBT braking transistor dissipates regenerated energy to help keep DC bus voltage within limits during deceleration. Eight digital inputs, two analog inputs, two analog outputs, and two relay outputs are scanned every 2 ms for responsive closed-loop control and external status signaling. The enclosure is rated IP20, so the drive must be installed inside a control cabinet with adequate airflow.
Mechanically, the housing uses form factor code E and inverter size 13, measuring 132 mm in width, 258 mm in depth, and 352 mm in height so it can fit standard 300 mm cabinet frames. Twenty-nine control terminals line the top edge, which keeps sensor, command, and feedback wiring accessible from one area of the unit. The general motor limit is 7.5 HP at 230 V. This layout supports cabinet-mounted installation where compact dimensions and straightforward terminal access are important.
