Product Description

The MDD117A-N-020-N2L-130GB0 digital AC servomotor from Bosch Rexroth is used along with the manufacturer’s digital drive controller. The motor and drive controller combination renders a rapid-response and cost-effective automation system. This product can be used for a wide range of applications to render an optimum solution. The device offers the assurance of a high contouring accuracy at high feed rates. The unit makes use of permanent magnets in its construction. It belongs to the MDD product group of motors. The motor is characterized by high operational reliability. The product features a floating bearing and a fixed bearing. The device installation can be done very easily using readymade cables.

The servomotor has a size code of 117. This product does not comprise any holding brake. The device must take load factors into consideration if the specified ambient conditions are exceeded. The unit is protected by means of its housing and covers. It can be operated in the stationary mode under weatherproofed conditions according to IEC 721-3-3 specifications. The motor housing features a black prime coating. The product depicts a B05 mounting design. The device comprises a plain output shaft with shaft sealing. This unit is subject to radial and axial forces during operation. This MDD117A-N-020-N2L-130GB0 motor encompasses a one-year warranty.

This product tends to get affected on its A side due to thermal deformations in its length. The device is meant to be reseated before using if it is going to be used after a two years interval. The unit has two types of electrical connections that comprise a power connection and a feedback connection. It encompasses a 12-pin flanged socket for the feedback connection. The motor has a feedback system for evaluating its speed and position. The product is intended to be put into operation between 0°C and 45°C with rated data. This device can be sent to any worldwide destination of your choice.