Product Description

The MDD115B-N-010-N2L-130GA0/S031 digital AC servomotor manufactured by Bosch Rexroth is used in combination with a drive controller. The servomotor is widely deployed in handling equipment and transfer facilities. The product is associated with a very high power density. The device has a length code of B. The device functions as a synchronous motor with electronic commutation because of its excitation using permanent magnets in its laminated core. This unit features a completely sealed motor housing. Its flange is designed with throughholes to support IM B5 or IM B14 type mounting. The motor encompasses a plain output shaft that supports non-positive shaft-hub connections.

This product features connectors on its flanged sockets to connect the feedback and power cables directly. The housing and covers of the device protect it against the penetration of extrinsic objects. The unit can be used for punching, pressing and other related applications only if it has been mounted in a shock decoupled or shock damped way. It can be installed both horizontally and vertically. The motor flange has a standard pilot diameter of 130mm. The permissible radial shaft load of the product is based on the point of application of force and the average speed. This motor is sold with one-year backup support.

The device is meant to be run at a speed of nearly 100rpm as a part of the reseating process when it is used after a storage period of two years. This unit portrays a dynamical balance according to the balance class indicated in DIN VDE 0530, section 14 specifications. This balance class is applicable only to the motor and not the components mounted on its shaft. The motor feedback cable can be connected using either a straight connector or an angle connector. The product incorporates a temperature sensor in its windings. The AC motor can be shipped globally anywhere across the world.