Product Description

The Bosch Rexroth MDD115C-N-010-N2L-130GA0/S031 digital AC servomotor comes with a temperature sensor integrated into the windings. This temperature sensor protects the motor against getting overheated during use. The motor power connection cable features a power cable, a connecting cable for the holding brake and a connecting cable for its temperature sensor. The AC motor incorporates an optical encoder system for its feedback. The product has a maximum duty cycle time of 15 minutes with intermittent operations. The device has an overall length of 458mm. The unit portrays a cylindrical shaft end as per DIN 748, Section 3 specifications for the output shaft.

The motor incorporates a standard housing that supports both surface cooling and natural convection. The product is suitable for highly dynamic applications. The device renders maintenance-free operation because of its brushless design. This unit has a compact construction because of power to weight ratio. Its permanent magnets are made of iron oxide or rare earth magnetic materials. The product allows direct attachment of belt pulleys and pinions to its shaft. Its floating bearing on the A side absorbs the radial forces encountered during its operation. The motor can be installed at a maximum elevation of 1000m over sea level.

The product is protected against penetration of water. The device permits the application of an additional paint layer over its prime coat on the housing. The thickness of this paint layer should never exceed 40µm. Its coat is resistant to diluted acids and lyes. The motor installation can be done in any orientation. It must be ensured that there is no fluid accumulation at the output shaft when the installation is done vertically. The motor permits both axial surface cooling and radial surface cooling by using a blower. This MDD115C-N-010-N2L-130GA0/S031 product is available with a year’s Wake Industrial warranty and delivered to its destination through reputed freight carriers.