Product Description

The Bosch MDD115C-N-030-N2L-130GB2 is a 3000 RPM servo motor. It is equipped with an optional holding brake. The blocking brake makes it possible to clamp or hold the output shaft at a standstill. This means that the axis is brought to a safe standstill when power is off. The holding torque of the blocking brake is 60 Nm. It is an electrically-releasing brake with 150 milliseconds release delay and 30 milliseconds clamping delay. Mass of the brake is 3.5 kilograms. The total mas of the motor and the brake is 55.5 kilograms. Bosch has designed MDD motors for 0 to 45 degrees Celsius ambient temperature. The installation site altitude must be between 0 and 1000 meters. During storage and transport, the temperature should be kept between -20 and 80 degrees Celsius.

The MDD115C-N-030-N2L-130GB2 servo motor has a standard housing design with IP65 protection rating. Operators can use the motor with either natural convection or surface cooling. Natural convection relies on flow of ambient air over the motor housing. Surface cooling relies on flow of forced air over the motor housing. A cooling fan or blower produces the forced air. Motor use with surface cooling enables higher levels of output torque and output current. The MDD115C-N-030-N2L-130GB2 motor supports digital servo feedback. This feature allow use of the motor for high-precision industrial and commercial applications. The main shaft on the MDD115C-N-030-N2L-130GB2 motor is plain and has a diameter of 32 millimeters. The motor housing has a length of 458 millimeters. The motor centering diameter is 130 millimeters. The MDD115C-N-030-N2L-130GB2 is a flange-mounted motor. The location of the power socket is on side B of the servo motor housing.