Product Description

The MDD115A-N-030-N2L-130PA0 is a servo motor with 3000 RPM maximum speed. The performance specifications vary depending on the choice of cooling method. With natural convection, the continuous torque and current at standstill are 28 Nm and 42.5 Amps respectively. Installation of a blower allows motor use with surface cooling (forced-air cooling). With surface cooling, the continuous torque and current at standstill are 41.6 Nm and 63 Amps respectively. The thermal time constant is 90 minutes with natural convection and 60 minutes with surface cooling. Bosch has provided a standard housing for the MDD115A-N-030-N2L-130PA0 motor. The motor housing is fully sealed. In addition, the cable connectors on the motor are also fully sealed. As a result, the MDD115A-N-030-N2L-130PA0 has an IP65 protection rating. This rating clearly indicates that the motor is dustproof and safe from low-pressure water jets.

The MDD115A-N-030-N2L-130PA0 servo motor supports digital servo feedback. A sensor measures motor speed, position and torque. The motor sends these measurements to the drive controller tasked with controlling motor parameters. The controller also provides electrical power for the motor. The motor feedback is transmitted through a dedicated feedback cable. The motor power is transmitted through a separate power cable. Both cables connect to the motor by means of connectors on the corresponding flanged sockets. The power socket is on side A. Operators need to order connectors for both cables separately. The main shaft on the MDD115A-N-030-N2L-130PA0 includes a keyway according to DIN 6885-1. The MDD115A-N-030-N2L-130PA0 servo motor does not feature a blocking brake. Weight of the MDD115A-N-030-N2L-130PA0 motor is approximately 33 kilograms. Optimal motor performance requires 0 to 45 degrees Celsius ambient temperature and altitudes of less than 1000 meters.