Product Description

The MDD090C-N-030-N2M-110PA2 Bosch Rexroth digital AC servomotor cannot be operated without a drive controller. This motor has IP 65 degree of protection. The product supports both natural convection and surface cooling. This device comes equipped with both lateral and longitudinal axes. The unit comprises a black prime coating on the housing. It utilizes a mounting flange with throughholes to incorporate Design B5 mounting. This motor has a keyway shaft that helps to achieve a form-fitting transmission of torque. The product comprises a blocking brake with 11Nm holding torque. This device incorporates a shaft sealing ring on the output shaft.

The motor shaft is applied with a load when it is affected by either axial or radial forces. This unit utilizes a blower with 1 x 115/230 VAC from the supply voltage for surface cooling. Its bearing on the B side gets damaged when thermal stress occurs with bevel gear pinions attachment. The product is ideal for operation in grinding machines. This device has a size code of 90. The unit uses the associated drive controller for activating the blocking brake. Its blocking brake must be kept closed for a minute during the seating process. This servomotor is available with a year’s Wake Industrial warranty.

The motor has a fixed output direction for the power connection. This product features the power cable as well as the connecting cables for its blocking brake and temperature sensor. The device and its related blower are connected by means of a protective motor switch. This unit houses a 12-pin flanged socket for the feedback connection. Its feedback allows its absolute indirect position detection. The motor parameters are stored in the drive each time it is powered up. These product-related torque-speed characteristics help in understanding the maximum speed supported for an application with known torque requirements. This MDD090C-N-030-N2M-110PA2 servomotor shipment is done to any destination.