Product Description

The Bosch Rexroth MDD090C-N-030-N2M-110PA1 is a 3000 RPM industrial servo motor. It is made with permanent magnets and supports electronic commutation. A brushless design and use of life-time lubricated bearings makes MDD motors maintenance-free. The motor housing is completely sealed. In addition, the connections for the motor power cable and feedback cable comply with IP65 protection category. As a result, MDD motors can be used directly within the working area of the connected machine. A temperature sensor integrated into the motor windings helps to prevent overload damage. The MDD090C-N-030-N2M-110PA1 has a standard housing that operators can use with either surface cooling or natural convection. MDD motors support optional blocking brakes. The blocking brake makes it possible to clamp or hold the output shaft at a standstill. This means that the axis is brought to a safe standstill when power is off.

The MDD090C-N-030-N2M-110PA1 is equipped with a 6.5 Nm rated blocking brake. The output shaft for MDD motors is available in two different designs: as a plain shaft for non-positive shaft-hub connections and shafts with keyways for form-fitting shaft-hub connections. The MDD090C-N-030-N2M-110PA1 is equipped with a shaft with a keyway. The motor shaft complies with DIN 6885-1. The motor supports digital servo feedback via an integrated multiturn encoder. The function of the encoder is to make measurements of motor speed and position. These measurements are transmitted to a servo controller. In response to motor feedback, the controller adjusts its output to bring motor parameters in line with desired values that are programmed by an operator prior to system commissioning. Power connection on the MDD090C-N-030-N2M-110PA1 is towards side A. Centering diameter of the MDD090C-N-030-N2M-110PA1 motor is 110 millimeters.