Product Description

Bosch Rexroth provides services in manufacturing several products of industrial automation. The company’s products such as brake resistors, servo motors, digital drives, and controls are widely used in the market. The company is mainly concerned about its product quality and customer satisfaction.

The HLR01.1N-14K5-N13R0-A-007-NNNN model comes in a single design with a free mounting solution which requires 8 screws with a tightening torque range of 3 Nm for installation. The brake resistor can perform efficiently between the temperature ranges of 0 to +40 ͦC at the maximum altitude of 1000 meters above the sea level without a reduction in nominal data. The device undergoes a rise in temperature of 65 K while dissipating the maximum power of 46 kW during the cycle time of 120 seconds. The brake resistor operates at the DC voltage of 700V and uses the regenerated power of 1566 kWs for the 34 seconds of the maximum allowed on-time duty to convert the excessive kinetic energy into thermal energy. The safest advised distance of 1000 mm at the top of the device, and 300 mm at the bottom and horizontal side of the device should be maintained to avoid any property damage due to the temperature higher than 105 ͦC.

The model HLR01.1N-14K5-N13R0-A-007-NNNN uses natural convection phenomena by dissipating heat to the surrounding air for cooling purposes. Copper wire of 6 AWG having a conductor temperature of 90 ͦC is used to make a connection through the converter. The model can be installed above the converter and provides a braking resistance of 13 Ohm. The total width, height, and depth of the model are 800 mm, 270mm, and 490mm with a net weight of 33 kg. The model comes without any additional options and additional design. This brake resistor can be shipped globally with a one-year warranty period from Wake Industrial.