Product Description

The DDS02.1-W025-DS04-00 drive controller offered by Bosch Rexroth must always be mounted after removing its faceplate. This faceplate should once again be replaced after the product is mounted. The device is meant to be stored and transported between -30°C and 85°C. The unit is meant to be stored in a shock-free and dust-free dry place. It should be transported using shock-damping supports if needed. The controller should also neither be tipped nor dropped during transport. The product is ideal for deployment in textile, packaging and printing machineries. The device has to be started only if the machine in which it is installed is in compliance with the appropriate EC machine directives.

The drive controller comes with a 04 function ID code. The product is associated with a maximum permissible relative air humidity of 95%. The device should be always dry during transport. The Bb contact of this device cannot be used to bridge its charging resistors. The SERCOS interface of the unit uses a fiber optic cable for communication between the drive and the control. Its AS+ and AS- terminals feature a power rating of 1.5W and 20VDC to 30VDC voltage rating. The controller can be connected next to another adjacent controller by using the DC bus rails.

The product weighs approximately close to 7.5kg. The device is protected against penetration of solid objects that have a diameter of more than 50mm. The unit has IP 10 protection rating as per DIN 40 050 specifications. It may be needed to implement air conditioning when using this controller because of the heat technology cooling method. The type designation of this controller helps to determine the plug-in module that should be fitted in each slot and to obtain the replacement parts correctly, efficiently and quickly. The product features 25g/m3 maximum permissible absolute air humidity. This drive controller comes with a warranty for one year and can be sent across the globe.