Product Description

Bosch Rexroth has established itself as a leader in the field of motion control technology. The company is well-known for developing cutting-edge solutions to contemporary industrial problems. Rexroth's products are very reasonably priced and are widely regarded as reliable. Drive controllers are part of the offerings from the company, and the DDS02.1 series is an example of such products

The DDS02.1-A100-DS24-03-FW requires a DC power supply with a 300 V input voltage. With this unit, it is possible to accurately and quickly control the position and speed of the corresponding servo motor. Condensed moisture and high temperatures should be kept away from the drive controller module. The device can withstand temperatures up to +45 degrees Celsius. The drive controller unit should not be exposed to hazardous environments or regions that are susceptible to explosion. This unit uses a digital servo motor to receive feedback while using only 40 mA of current at 24 V. Also, it has a transport and storage temperature range of -30 ^oC and 85 ^oC.

The power dissipation of this DDS unit has a value of 97 Watts. It is necessary to order the model's firmware separately. EMC compliance is included in the model to reduce undesired radio frequencies. The DDS02.1-A100-DS24-03-FW can be used for a variety of drive applications by utilizing a range of different software modules. In general, software modules would comprise drive instructions, drive characteristics, and any necessary firmware. The maximum installation elevation permitted is 1000 meters, with absolute humidity less than 25 g/cubic-meters in the vicinity of the installation site. Because of its IP 20-rated enclosure, the drive controller is protected from dust particles.