Product Description:

The 2AD132D-B35OB2-AS06-A2V1 is an AC induction motor produced by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series. This unit serves as a prime mover in industrial automation, supplying continuous rotary power for material-handling, processing, and positioning equipment where reliable three-phase drive torque is needed.

The motor’s frame uses size code 132, establishing the flange diameter and bolt circle that match standard machine layouts, while the internal stack length is identified by code D to set its nominal output range. Heat is removed by an integrated Axial Blower that forces air along the stator housing so full rated current can be sustained without external cooling aids. Installation is flexible because the housing supports Flange and foot mounting, letting a designer secure the unit either to a baseplate or directly to a gearbox face. Rotor position is returned to the drive through Digital servo feedback, enabling closed-loop speed and torque regulation. Electrical conductors exit toward Side B, and the cable glands are located on the top of the terminal box to separate power wiring from floor-level contaminants. A Smooth shaft without seal is supplied, which minimizes backlash but requires the coupled mechanism to provide its own environmental sealing; the shaft on Side B is omitted entirely to keep the motor compact. Winding code AS matches the stator impedance to the intended drive inverter.

Service life is supported by Heavy-duty rolling bearings that carry both radial and axial loads encountered in belted or direct-drive arrangements. The motor ships without a holding brake, so static load retention must be handled by the mechanical system or drive torque. Power enters from the Top of the housing, simplifying vertical cable runs inside cabinets. Dynamic behavior is classified under vibration grade R, limiting transmitted vibration and supporting smooth machine operation at the rated speed.

View Datasheet