Product Description:

The 2AD132D-B05OA1-AS03-A2N2 is an AC induction motor manufactured by Bosch Rexroth Indramat and delivered as part of the 2AD 3-Phase Induction Motors series. Within automated lines, it serves as the primary rotary drive, supplying steady torque for conveyors, cutters, or forming equipment that must maintain constant speed under varying load. Mechanical dimensions, electrical interfaces, and feedback selection are coordinated with compatible drive controllers for use in multi-axis systems. The motor is intended for industrial applications that require dependable continuous-duty operation.

Thermal management is handled by a built-in axial blower that forces air through the housing to keep winding temperatures within the continuous rating. Position and speed data are provided through the integrated high-resolution motor feedback device, allowing tight velocity control in motion platforms. Output torque reaches the load through a smooth shaft without a seal, a configuration that removes seal friction and is best suited for clean installation conditions. For machine frames that use round pilot flanges, the motor includes flange mounting holes. Its electrical characteristics correspond to the AS winding code, so the connected inverter can apply the proper current limits. Standard bearings absorb radial and axial forces, and length code D provides a longer active section for this frame size.

The unit is delivered without a holding brake, so static load retention must be provided by the drive or an external clamp when power is removed. Power conductors exit toward side A and emerge at the top of the stator, keeping cable routing above the motor envelope. The frame size is 132, which sets the pilot diameter and bolt circle for compatible machine mounts. The motor uses vibration grade S to limit residual imbalance at the shaft, and the side-B face has no shaft end for single-sided power transmission.