2AD132D-B35RB3-BD03-D2V1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911245145
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 2AD132D-B35RB3-BD03-D2V1 motor features a frame size of 132, B35 mounting type with flange and foot, IP65 protection class, and a rated power of 4.5 kW. Part of the 2AD 3-Phase Induction Motors by Bosch Rexroth Indramat, it includes a resolver for feedback and a blower cooling type.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
2AD132D-B35RB3-BD03-D2V1 is an asynchronous servo motor. It is part of the 2AD series from Bosch Rexroth. 2AD motors are surface cooled motors with a radial or axial blower. Operators can select the blower type, the location of the power connection, feedback type, and an optional holding brake. These motors are deployed with a compatible Bosch motor controller. The controller supplies motor power and manages its speed and shaft position. The power cable for the motor must have a cross-section equal to or greater than 25 mm2. Nominal output power of the 2AD132D-B35RB3-BD03-D2V1 motor is 22 kilowatts. Its torque output is 140 Nm. The base and peak speed ratings are 1500 RPM and 7500 RPM respectively. Nominal current and voltage ratings for the servo motor are 80 Amps and 217 Volts.
The radial blower on the motor consumes 330 VA and its input voltage is 400/460 Volts AC (three-phase). The average airflow production of the blower is 1000 m3/h. An optional holding brake is not installed on the motor. Bosch has designed the motor unit for foot mounting and flange mounting. Location of the power terminal is on the right side. Feedback type on the motor is high-resolution digital feedback. The motor shaft has a key that is balanced with the full key. A seal is installed on the shaft to improve protection against external contaminants. Bosch has installed heavy-duty bearings on the motor for higher performance and reliability. Average service life of the bearings is 20,000 hours. This value is valid only as long as load limits – as specified in the documentation – are not exceeded. Operating the motor within load limits is also important for the ensuring the motor lubricant does not get consumed.
Frequently Asked Questions about 2AD132D-B35RB3-BD03-D2V1:
Q: What is the motor insulation class?
A: Insulation class of the motor is F.
Q: What is the thermal time constant?
A: Thermal time constant of the motor is 55 minutes.
Q: What is protection rating of the blower?
A: Protection rating of the blower is IP54.
Q: What is protection rating of the feedback connection?
A: Protection rating of the feedback connection is IP65.
Q: What is the optimal site elevation?
A: The optimal site elevation is below 1000 m.
