Product Description

DKC01.3-018-3-MGP-01VRS belongs to the DKC family of servo drive controllers. These servo controllers are manufactured by Indramat Rexroth Bosch. Being an Indramat product, you can be assured that these drives have unparalleled reliability. Combined with their economical price point and number of features, DKC drives are the best solution for you single and multiple axis automation needs.

DKC01.3 drive controllers are also referred to as EcoDrive Cs. EcoDrive Cs are a low power tier of EcoDrive controllers. The four motor sizes, identified by their power requirements, are 100 W, 200 W, 400 W and 750 W. It is important to note that before the drive can be used it must be programmed with your required parameters. Drive parameters can be programmed through use of the DriveTop software. DriveTop software is built into the drive.

The DKC01.3-018-3-MGP-01VRS has a line number of 01 and a design number of 3. The firmware type used is a multi interface general purpose. The firmware version of this drive is 01. The DKC01.3-018-3-MGP-01VRS has a rated current of 18 amps. It also has a nominal voltage DC bus power connection rating of 300V. There are two pin cable ports contained in the drive, with an extra one being an incremental and absolute encoder emulator.

EcoDrive Cs is the latest in drive controller technology. Make sure to follow all safety guidelines to avoid damage to the drive and injury to self. This product is available from Wake Industrial with a one-year warranty period.