Product Description

The N41HRFL-LNK-NS-00 hybrid motor is a two-phase step motor. This motor from Pacific Scientific features enhanced torque linearity that makes it capable of offering high-peak torque. It is compatible with several drives from the manufacturer as well as from others. This device features variations in running torque at low speed with current rating changes. The product also features high acceleration capabilities. The unit is an ideal cost-effective substitute for servomotors when used in applications that have moderate speed requirements. The hybrid step motor is encased in a NEMA 42 size square frame with a height and width of 4.325 inches. The motor is fitted with a laminated rotor that has one stack.

The extra torque produced by the step motor makes it an apt option for intermittent duty applications. This product features an acceleration boost that aids in the fast movement and positioning of loads. It supports a heavy-duty NEMA mounting configuration and a winding code of L. The square frame has a rugged, housing-less design. The bearings have a long life because the outer bearing races cannot turn due to a locking mechanism. The device requires less power for operation compared to three-phase motors that produce the same amount of torque. The motor can be sent to any worldwide location through our dedicated shipping team.

The hybrid motor makes use of an in-steel insert and an O-ring to lock the front and rear of the bearings. This locking action also helps in avoiding movement of the axial shaft. The device features an IP 65 protection rating to meet washdown and splash-proof requirements. The laminated rotor has a large diameter and is integrated with permanent rare-earth magnets that offer high resistance to demagnetization. The motor has a holding torque of 11.68Nm and a torque-to-inertia ratio of 21.1 rad/s² x 10^-3. The motor is available with a warranty for one year from Wake Industrial.