Product Description

The VT 16000-2X-120-A servo amplifier by Bosch Rexroth comprises a voltage stabilizer to offer a clean voltage as well as stable and consistent performance. The amplifier must neither be opened nor touched during its operation. The product features a voltage ranging from +/-22V to +/-28V when it encompasses voltage regulators. The device handling should not be done by unauthorized personnel. The unit is intended to be operated between 0°C and 50°C. Its installation and operation have to be done only after reading the associated documentation. This amplifier depicts a hot housing with a temperature of over 60°C during operation.

The product can work like a drive controller when maximum safety and flexibility are required. The device has a relay contact with a nominal coil resistance of 2000 Ohms. The unit can amplify the low current control signals for powering the windings of the servomotor. It has an internal logic voltage supply. The amplifier can function with both asynchronous and synchronous motors. This product features an additional control input for use with the manufacturer’s system cards. The device tipping and dropping during transport must be avoided. This servo amplifier is sent through trustworthy logistics agents with a one-year warranty.

The device has a height of 128mm for its front plate. The unit supports tuning for optimal performance of constant velocity circuits. Its electrical connections should not be undone when there is an active power connection. The product permits direct connection to three-phase industrial mains supply networks with an earthed neutral point. This device has high durability combined with a rugged design. The unit cannot operate on its own or outside a closed housing. It has to be ascertained that the periodic voltages between the amplifier housing and outer conductor do not exceed the specified limit. The amplifier is to be used only with the manufacturer’s spare parts and cables.