Product Description

The Bosch VT-UK2-3X/VT11963A/U150 is a universal card. It is designed for assembling of various operational amplifier circuits. The hardware provided on the card enables construction of five types of function groups including a differentiator, a summator, a Schmitt trigger, an inverter and a regulator. The card hardware that enables this construction include three operational amplifiers and five potentiometers. The potentiometers belong to the category of zero-point potentiometers that have a resistance of 10 kiloohms and consume up to 0.5 Watts of power. The VT-UK2-3X/VT11963A/U150 requires ±15 Volts DC operating voltage. Its current draw depends on requirements but does not exceed 80 milliamps. The current at the output of the VT-UK2-3X/VT11963A/U150 does not exceed 5 milliamps. The VT-UK2-3X/VT11963A/U150 comes in Euro card format which has 100 x 160 millimeter dimensions.

The front plate on the VT-UK2-3X/VT11963A/U150 has a height of 128.4 millimeters and a width of 5.08 millimeters. The minimum permitted working temperature is 0 degrees Celsius and the maximum permitted working temperature is 50 degrees Celsius. The mass of the universal card is 0.1 kilograms. The VT-UK2-3X/VT11963A/U150 is open and requires dust and fluid protection. Personnel handling the card should be properly trained to avoid damaging the card and associated equipment. Relevant safety instructions included in the product documentation must be followed at all times. Failure to follow relevant safety instructions can lead to equipment damage and injury to personnel. Operators must only install or remove the card when it is de-energized. The VT-UK2-3X/VT11963A/U150 is susceptible to radio-frequency interference (RFI). Therefore, it must be separated from radio transmitters and other devices that emit RFI. All signal wires that terminate on the card must be separated from power cables.