Product Description

Bosch Rexroth is renowned for the quality of its products. Digital axis control, synchronous motors, spindle motors, drive controllers, inverter modules, power supply motors, and brake choppers are among the company's products.

The VT-HNC100-1-1X/130/LS001model is equipped with a standard RS232 serial interface and is designed for open and closed-loop control of the position, velocity, or pressure of electrohydraulic axes. This variant is equipped with 2 inductive position transducers with a maximum current of 30 mA per channel and a voltage supply of 2 V. The VT digital axis control is equipped with a 16/32-bit MC68376 processor and must be operated between 0 and +50 degrees Celsius. While operating the model, all channels should not be used concurrently. Typically, a pin is equipped with both current and voltage inputs so that either the current input or the voltage input can be used simultaneously. The model working voltage range is 18 to 36 VDC, and it is intended to be incorporated into a system or machine or combined with other components to build a system or machine. The VT digital axis control has a 1 MB EPROM, 8 KB EEPROM, and 256 KB RAM and must be stored within a temperature range of -20 to +70 degree centigrade.

The model VT-HNC100-1-1X/130/LS001 possesses 4 analog voltage outputs with an output current of +10 mA and a load of 1 Kohms. There are two analog current outputs in the model with a load of 500 ohms and a residual ripple content of +60 mV. The model conforms to EC directives and satisfies all criteria for controlling hydraulic and electric drives. This device (VT-HNC100-1-1X/130/LS001) is distributed globally by Wake industrial, which also provides a replacement warranty.