VDP16.3AKN-D1-NN-NN
- MPN: R911171015
- Stock: Call for Quote
COVID-19 Update: Wake Industrial is open and available to support your automation needs.
This company was fantastic to work with! Very patient with us to make sure we ...
~ Carla Morgan Excellent Kentucky, USANext day air shipping and we are up and running!! Thanks so much!
~ Jeanne Wolter Excellent Colorado, USAWe asked for a fast turn around and Wake was up to the task!
~ Darrell Chapman Excellent Indiana, USAI contacted Gregg one morning in desperate need of two servos to get our Filler ...
~ Paul Kovacs Excellent California, USAThe service that I received was outstanding!
~ Gary Douglas Excellent Ontario, CanadaUnderstood our situation, and worked to help us get it solved. Very responsive, and stepped ...
~ Brian Tomlin Excellent Arizona, USAThe VDP16.3AKN-D1-NN-NN is an IndraControl based HMI manufactured by Bosch Rexroth. It comes with a 12” TFT display with an 800 * 600 resolution, CDI interface, four USB slots, and one placed at the front end. It has no touch capabilities but comes with 16 function keys, 16 machine keys, and 14 additional keys all found on a keyboard. Some other features found in the VDP16.3AKN-D1-NN-NN include a status LED operation for the hard disk, UPS, temperature, and voltage. It consumes 20 W of power supplied through a single 24 V power supply unit. It has a vibration and shock resistance of 1g and 15g, respectively. The overall protection category and front protection degree of the VDP16.3AKN-D1-NN-NN are IP20 and IP 65, respectively.
The manufacturer advises that during receipt of the VDP16.3AKN-D1-NN-NN, you need to make sure that the shipment matches your order by checking the nameplate and confirming the specifications with your delivery note. If you satisfied, you should go ahead and verify if it’s in pristine condition. Check for any signs of visible damage and contact the seller’s sales department immediately. Have a professional install the unit. Some parts are susceptible to wear and tear when they exceed a certain number of operating hours.
Inform the manufacturer of any hardware failure. And if it’s an emergency, you will need to consult a professional. But to ensure the machine lasts, you will need to use safety extra-low voltage as stipulated by the EN regulations. If the front panel is dusty, the manufacturer advises using a damp cloth to remove the particles.
Control Panel Interface: | CDI |
Front Panel: | A Touch Screen |
Other Design: | Not Equipped |
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2021 - Wake Industrial - All Rights Reserved