Product Description

The TVM 2.4-050-220/300 is an industrial power supply module designed by Rexroth Indramat to serve as a source of electrical energy for industrial drive controllers. This module is a highly sophisticated device featuring special technological components that allows it to resist industrial conditions that might damage other conventional power supply modules. The use of the TVM 2.4-050-220/300 power supply module in industrial production is highly cost efficient as a single module can be used for more than five industrial drive controllers simultaneously. An air blower is integrated into the module to keep the heat generated in the module’s driving unit within the tolerated heat range. Optimum operation, the TVM 2.4-050-220/300 industrial power supply module might require the connection of special components such as the soft resistors, single phase transformer, and the dynamic brake resistor.

The TVM 2.4-050-220/300 power supply module uses a type current of 50 Amperes, and a three-phase input voltage of 220 volts. The frequency of the electrical power received by the drive controller should fall between the range of 50 to 60 hertz. This power supply module is also designed with a DC bus which uses a voltage of about DC 300 volts. The housing of this drive controller features an H3 and H4 diagnostic display unit which it uses to alert the operator of any operational error it encounters during operation. The TVM 2.4-050-220/300 power supply unit handles errors by bringing the drive connected to it to a standstill.

The TVM 2.4-050-220/300 power supply module should not be operated under ambient temperature exceeding +55 degree Celsius, or at elevation height greater than 1000 meters above sea level. Operating the module under these two conditions can affect the quality and consistency of the module. This unit can be shipped globally with a one-year warranty period from Wake Industrial.