Product Description

The SD-A3.0500.30-05.000 is one of the most advanced production of Bosch Rexroth Indramat. It is a permanent magnet industrial servo motor designed according to international quality standards. This industrial servo motor features a compact housing unit that provides protection according to the IP54 protection class, allowing the motor to maintain optimum operation even in harsh environmental conditions. The SD-A3.0500.30-05.000 industrial servo motor is designed to be safe for industrial operation, however the motor should only be used by well trained engineers who are familiar with Rexroth Indramat devices and have gone through the documentation delivered with the motor. The housing of this industrial servo motor is also covered by a black prime coating which is resistant to dilute acids, dilute alkaline, sea water and lye. The coating protects the motor from the rapid deterioration that can be caused by these mildly corrosive substances. The SD-A3.0500.30-05.000 industrial servo motor requires a rated input current of 5.2 amperes during operation, it can also generate an output torque of about 5 newton meters. During operation, this industrial servo motor can reach a maximum speed of about 3000 revolutions per minute. The rated power output produced by the SD-A3.0500.30-05.000 industrial servo motor is about 1.56 kilowatts, the motor also maintains a windings resistance of about 2.526 during operation. Also, the windings inductivity of the motor is about 18.7milihenry. The SD-A3.0500.30-05.000 industrial servo motor features a tacho feedback, the tacho feedback ensure an accurate position control and speed evaluation. The maximum permissible ambient temperature for the operation of this servo motor falls between 0 to about 40 degree Celsius, also the motor should be installed at an height that exceeds 1000 meters above sea level.