Product Description

The MHP112C-058-HP0-ANNNNN is a motor with motor size of 112 and motor length of C as per the Bosch type code. The code for the motor winding is 058. The motor is designed by Bosch Rexroth for use with drives belonging to Indramat PowerDrive series. Features available on the MHP112C-058-HP0-ANNNNN motor include incremental encoder for motor feedback and motor shaft with key and sealing ring. The integrated encoder is rated for 2048 increments. Optional holding brake can be ordered as the standard motor does not include one. Holding brakes are available in 22 Nm and 70 Nm torque ratings. The motor weighs 48 kilograms and its housing has IP65 protection rating. Approximate length of the motor is 458 millimeters and is approximate diameter is 130 millimeters. Power connector on the motor points towards side A and is located on the top side of the motor.

Performance specifications of the MHP112C-058-HP0-ANNNNN include 4000 RPM characteristic speed, 38 Nm torque at standstill, 37.7 Amps continuous current at standstill, 2 kilowatts power motor, 2500 RPM base speed, 182 Volts nominal motor voltage, 7.5 Amps nominal motor current, 7.6 Nm nominal motor torque and 90 minutes thermal constant. The torque constant and voltage constant at 20 degrees Celsius are 1.17 Nm/A and 72.2 Volts/1000 RPM. The resistance of the motor winding at 20 degrees Celsius is 0.12 Ohms and the winding inductance is 1.5 millihenry. The maximum motor winding temperature must not go above 155 degrees Celsius. Insulation class of the MHP112C-058-HP0-ANNNNN is F as per DIN VDE 0530 Section 1. Housing of the motor is coated with black prime coat. The motor is designed for cooling through natural convection. This unit can be shipped globally with a one-year warranty period from Wake Industrial.