Product Description

The MDD112D-N-030-R2L-130PB1 digital AC servomotor produced by Bosch Rexroth portrays the limiting data for torque and speed through its operating curves. This motor supports the S1 operating mode and S6 operating mode as per DIN 57530 / VDE 0530 specifications. The product is painted with a black prime coat on its housing. This device features a permissible axial force that is 0.35 times the permissible radial force. The unit has a nominal motor speed of 3000min^-1. It features a standard housing design to support natural convection as well as surface cooling. This motor cannot be fitted with an angle feedback connector if axial surface cooling is deployed.

The product incorporates a mounting flange designed as per DIN 42948 specifications. This device is sized at 587mm. The unit is balanced with the entire key. Its shaft portrays a cylindrical shaft end with a DS M3-8 center hole. This motor utilizes an INS 172 connector for its power connection. The product is characterized by a reduced balance class in accordance with DIN VDE 0530 specifications. This device is an apt option for applications that require an extreme degree of synchronism. The unit has high overload capability because of the efficient heat conduction from the walls of the stator to the exterior wall of the motor housing. This MDD112D-N-030-R2L-130PB1 servomotor features a one-year backup support period.

The motor shaft supports the direct fitting of belt pulleys and pinions on it. Its electronic commutation results in high cyclic load capacity. This product has a fixed bearing on the B side. The device uses the blocking brake to retain the output shaft in a standstill position. This unit has a Type L total shock-response spectrum according to IEC 721-1 specifications for the longitudinal axis. Its feedback helps to determine the position of the rotor. This motor delivery is done in rugged packaging so that it is not damaged during transportation.