Product Description

The MDD112C-N-015-N2M-180GA0 digital AC servomotor provided by Bosch Rexroth achieves a non-positive and backlash-free transmission of torque with its plain shaft. This motor is affected by thermal deformations of its length on the A-side. The product reseating action must be performed only after shutting down its drive controller for 60 seconds. This device pickup and transportation should be done using crane belts. The unit should be free of heavy loads and impact on the shaft to avoid damage to its bearings. Its wiring should be done exactly as per the terminal diagram given by its machine manufacturer. The motor comprises two tapped holes through which lifting screws or hooks of a tackle chain can be placed.

The product comprises plastic protective covers that are intended to be removed only before mounting into the machine. This device is to be kept in a dry state during storage and transportation. The unit housing features a type plate with its continuous current as well as torque ratings in standstill mode with surface cooling and natural convection apart from insulation, protection rating and torque constant. It must be ensured that the crane belt used to lift the motor is not wound around the plain shaft. This servomotor has backup support for a year.

The motor cable surfaces feature poor adhesion to prevent sticking in drag chains. This product is associated with a duty cycle time that cannot exceed 15 minutes. The device features high cyclic load capacity, overload capabilities, power-to-weight ratio and dynamics. This unit is a good choice for packaging and printing machines as well as handling equipment and transfer facilities. Its operating curves highlight the intermittent duty torque with the S6 operating mode. The motor features protection against overload damage because of the temperature monitoring by the integrated sensor. This servomotor dispatch across the world is done through renowned shipping agents with a vast network.