Product Description

The MDD112D-N-030-N2L-180GB0 is MDD series synchronous servo motor. As per the product type code, the motor frame size is 112 and the motor frame length is D. The motor mounts through a 193 millimeter flange. Each of the four mounting holes on the flange has a 14 millimeter diameter. The motor has a plain shaft with 32 millimeters diameter. Approximately 60 millimeters of the motor shaft are outside the main housing. The length of the MDD112D-N-030-N2L-180GB0 motor is approximately 537 millimeters and its centering diameter is 180 millimeters. The motor connects to a controller through two separate cables. One cable is a feedback cable and the other is a power cable. Two types of connectors are available for motor power and feedback. The motor connector and motor feedback connectors must be ordered separately. Motor feedback method supported by the motor is digital servo feedback.

Customers select the output direction of the electrical power connector at the time of ordering. On the MDD112D-N-030-N2L-180GB0 motor, the electrical power connector is on side B of the housing. Both the length of the motor and its weight increase due to an optional blocking brake. The MDD112D-N-030-N2L-180GB0 motor is supplied without a blocking brake and its weight is 59 kilograms. The motor has an IP65 rated housing. With this rating, operators can use the motor under adverse operating conditions. The recommended ambient conditions for motor operation include 0 to 45 degrees Celsius temperature and 0 to 1000 meters elevation. Cooling methods of the MDD112D-N-030-N2L-180GB0 motor include natural convection and surface cooling. Nominal speed rating of the servo motor is 3000 RPM. Insulation class of the motor is F and its surface is painted black.