Product Description

The MDD112C-N-020-R2M-130GA0 product by Bosch Rexroth comes in nine variants with different lengths and windings to meet diverse requirements of industrial manufacturing and machining applications. The company aims to solve complex engineering problems with its devices like drive controllers, linear motors, and digital AC servo motors. This AC motor is available in four lengths and various speed ratios each suitable for specific applications. This model is well-suited for applications that require a nominal speed of 2,000 revolutions per minute.

The MDD digital AC servo motor is a naturally aspirated motor designed to be used in conjunction with intelligent drive controllers. The motor feedback is captured using a digital servo feedback system and a multi-turn encoder. This motor with a centering diameter of 130mm, provides a great balance when mounted on a plain surface and fastened with specified screws. The provided output shaft is plain and sealed with a ring. The power connection is offered at the A side of the housing. To prevent confusion during installation, the sides of the housing are labeled. To get the maximum data output from this motor, the ambient temperature must be maintained in the acceptable range of 0 and +40 degree Celsius.

The AC servo motor is safe to be used in applications at a maximum height of 1000 meters above sea surface. To ensure operational reliability, the company inspects and tests the motor up to its capabilities during manufacturing stages. It comes without the holding brakes and falls in category ‘F’ insulation. It also offers an IP65 degree of protection with its perfectly packed housing which marks it safe against dust particles and water jets. This allows it to be freely used in environments with moisture conditions.