Product Description

The MDD112B-N-030-N2M-130PB3 digital AC servomotor from Bosch Rexroth and the manufacturer’s drive controller work in combination to offer a cost-effective automatization system. This servomotor belongs to the MDD product group of such offerings. The product has a high degree of operating reliability. The device is equipped with a blocking brake. The unit portrays a nominal speed of 3,000min^-1. Its feedback helps in evaluating the speed and position of the related motor. The motor exhibits derated performance when it operates outside the ambient data. The product comprises a black prime coating for its housing. The device supports B5 and B14 mounting styles.

The device features a 130mm standard pilot diameter. The unit experiences radial and axial forces during operation. Its blocking brake does not offer assurance of personnel protection. This motor has to be reseated if it is put to use after a storage period of more than two years. The product can use either a straight connector or an angle connector for feedback. The device comprises a power cable as well as connecting cables for its blocking brake and temperature sensor. The unit uses an optical encoder system with a system accuracy of +/-0.5 angular minutes. Its operating curves depict the speed and torque limiting data of the motor.

This motor has a maximum duty cycle time of 15 minutes. The product features a permissible axial force that is 0.35 times the permissible radial force. This device encompasses bearings with a lifespan of 30,000 operating hours. The unit has an overall length of 387mm. It features 10.5Nm continuous torque at standstill with natural convection cooling mode. It must be connected using only the manufacturer’s cables. The feedback cable has absolute resistance to greases and mineral oils. This product comprises a type plate attached to its housing. This servomotor has a one-year warranty and is shipped globally.