Product Description

The MDD115C-N-020-N2L-130GA1 digital AC servomotor offered by Bosch Rexroth needs a shaft sealing ring on the shaft for applications where effects of water jets or dirt are possible. This motor incorporates a 45Nm blocking brake. The product might require a blower attachment for continuous start-stop operations with high repetitive frequency levels. The device is balanced in terms of the normal balanced class N. The unit achieves its feedback connection via a 12-pin flanged socket. Its permissible radial force depends on the point of application of force and the average speed. The motor encoder allows a relative indirect evaluation of position that is also stored in the drive controller.

The product utilizes the DC bus voltage rendered by the supply source at the associated drive to determine its maximum speed. The device has a 2mH winding inductance. The unit is 458mm long without considering the shaft. Its motor feedback encompasses data storage capacities that store the parameters of the motor. The motor is integrated with a plan and smooth output shaft. This product uses circular connectors for its power connection. The device is meant to have its connections done with cables from other manufacturers only after ensuring that the cores allocation between the interface on the drive and the flange socket is correct. This servomotor with backup support for one year is delivered through a trustworthy logistics network.

The motor type plate encompasses details such as the type designation, cooling mode supported, nominal speed, continuous torque and more. The product storage is supposed to be carried out in an environment free of shock and dust. The device has plastic protective connectors for protection against damage and moisture. The bearings in this unit can get damaged if there is an impact on its output shaft. The motor requires a crane and belts for lifting it if it is heavy and there should be no load during this time.