Product Description

The MDD112A-N-030-N2M-130GA1 is a state-of-the-art industrial servo motor manufactured by Rexroth Indramat to operate in combination with an intelligent drive controller and form a rapid response automation system that can meet the kinetic energy requirements of highly sophisticated industrial machines. This electrical motor is designed under ideal industrial conditions, its unique housing unit provides it with a high degree of protection, and allows it to maintain a high degree of operational efficiency even if it is being used in industrial conditions considered too harsh for convectional industrial machines. This servo motor also features special grease-lubricated ball bearings designed to reduce the frictional heat generated at the motor’s output shaft when the motor is in operation.

The MDD112A-N-030-N2M-130GA1 industrial servo motor features a sophisticated temperature regulation sensor which monitors the operational temperature of the motor in real-time to prevent overload damage. The MDD112A-N-030-N2M-130GA1 electrical motor also features a high cyclic load capacity due to its ability to undergo continuous start-stop operations at a high repeat frequency. At a motor temperature of 20 degrees Celsius, this industrial motor operates at a torque constant of about 0.61-newton meters per ampere and a windings resistance of about 0.66 ohms. Also, the thermal time constant of this industrial motor is about 100 minutes.

The MDD112A-N-030-N2M-130GA1 industrial servo motor is about 312 millimetres long with a centring diameter of about 193 millimetres. The total weight of the servo motor is about 25 kilograms. This electrical motor is designed to operate at a top level for a long time, however, to maintain these operational standards, all additional components used with this motor must meet the quality standards stated in the documentation supplied with the motor.