Product Description

Bosch Rexroth produces an extensive variety of industrial automation equipment. The company's market resources are AC servo motors, frequency converters, drive converters, inverter modules, and drive controllers.

The MDD093C-F-030-N2L-130PB2 model has a 1.1-kilogram holding brake with a holding torque of 22 Newton-meters and a nominal voltage of 24 volts. The clamping and release times for the holding brake are 30 and 70 milliseconds, respectively. The MDD093C AC servo motor can generate a maximum torque of 60.6 Nm and a top rotating speed of 3000 RPM. This AC servo motor is one of the company's products that provide customers with the highest customization and adaptability. In addition, this motor gives an exceptional degree of contouring precision, which is especially crucial while operating at high speeds. The motor has class N balancing and digital servo feedback for monitoring rotor activity. The motor must be used with the specified attachments and accessories. The model must be carried between -20 degrees Celsius and +80 degrees Celsius and has an insulation class of F. Without the installation height and temperature conditions of 1000m above sea level and 0 to +45 degrees Celsius, the MDD093C AC servo motor power figures cannot be obtained.

The model MDD093C-F-030-N2L-130PB2 has an IP65 protection rating, a 130 mm centering diameter, and a power connection on the motor housing's B side. The output shaft of the model has keyways and a sealing ring on top. The model housing uses liquid cooling to transfer heat through a coolant. The motor generates 19.5 Nm of continuous torque using a modest constant current. When coupled with a drive controller, this motor (MDD093C-F-030-N2L-130PB2) offers a cost-effective and efficient means of monitoring and controlling your operations, enhancing their overall performance.