Product Description

Bosch Rexroth is the foremost manufacturer of AC servo motors, linear motors, synchronous motors, spindle motors, drive inverters, drive controllers, control sections, drive converters, brake choppers, and other mechanical components.

The MDD065A-N-040-R2L-095PB1 model is protected against dust and liquids by IP 65 certification. The first number denotes dust protection, while the second number implies liquid protection. The MDD065A AC servo motor has a thermal time constant of 30 minutes and a power connection on the B side of its housing. While transporting or storing the motor, temperatures between -20 and +80 degrees Celsius must be maintained. The model incorporates both electrical commutation and permanent magnets into its construction. The motor has a holding brake having a braking torque of 3 Nm and a weight of 0.55 kilograms. The model has a maximum torque of 2.3 Newton-meters and a maximum speed of 4000 revolutions per minute. The model must be operated between 0 and 45 degrees Celsius to obtain the specified power levels, and the installation site must be between 0 and 1000 meters above sea level. The 3.2-kilogram servo motor can provide a constant torque of 0.8 Newton-meters while needing just 1.8 A of electricity. The insulation rating of the MDD065A AC servo motor is F, and its output shaft incorporates keyways for efficient torque transfer.

The model MDD065A-N-040-R2L-095PB1 is equipped with digital servo feedback and must be used with the drive controller and accessories indicated by the manufacturer. To guarantee that the motor functions without interference, insert stress reliefs into the conduit threaded joint of the motor power connection. Due to its brushless construction and lubricated bearings, the motor is anticipated to have a long life. This servo motor (MDD065A-N-040-R2L-095PB1) is sold by Wake Industrial, providing an easy-to-claim replacement warranty.