Product Description

The MDD093C-F-030-N2L-110GA1 industrial servo motor is one of the latest and most sophisticated productions of the reputable Rexroth Indramat, it is a highly advanced industrial motor designed to supply a wide range of industrial machines with the kinetic energy they require for optimum operation. The housing of this industrial motor offers it the protection that meets the IP65 protection class, this housing unit provides an optimum degree of protection, allowing the motor to operate smoothly in industrial conditions considered too harsh for convectional industrial motors. The MDD093C-F-030-N2L-110GA1 industrial motor combines old motor design with new innovation to form a new motor standard, it also features sensors and actuators which monitor its operational condition and supplies the drive controller with the information it requires for optimum operation.

The MDD093C-F-030-N2L-110GA1 industrial motor features a centering diameter of about 130 millimeters and a length of about 386 millimeters. Also, the total weight of this industrial motor is about 22 kilograms. The nominal input current required by this industrial motor for optimum operation is about 32 amperes, at this current, this industrial motor generates an output torque of about 19.5 amperes while rotating at a speed of about 3000 revolutions per minute. Also, the maximum input current that can be used with this industrial motor is about 145 amperes.

The MDD093C-F-030-N2L-110GA1 features a special electrically releasing holding brake, this holding brake operates with generates a holding torque of about 6.5-newton meters, it operates with a nominal current of 0.5 amperes, and a nominal voltage of about 24-newton meters. The total mass of this holding brake is about 0.5 kilograms. The installation and general operation of this industrial motor should be done by highly trained engineers of Rexroth Indramat.