Product Description

Bosch Rexroth is committed to providing great customer service via the manufacture of high-quality products such as alternating current servo motors, frequency converters, inverter modules, brake choppers, control sections, and controllers.

The MDD093B-N-030-N2M-110GB1 model has a plain output shaft and a sealing ring and should be used in line with the user manual's instructions. While spinning at a maximum nominal speed of 3000 revolutions per minute, the motor generates 45.1 Nm of theoretical torque and uses 108.2 A of peak current. The MDD093B AC servo motor has an integrated multiturn encoder, 0.43 ohms of winding resistance, and a 50-minute thermal time constant. The 16.5-kilogram ac servo motor has a winding inductivity of 4.4 mH, a balancing class of N, and uses natural and surface cooling to manage its internal temperature. The most intriguing aspect of this servo motor is that it can be utilized immediately within the machine's workspace, even under harsh circumstances, and it delivers a constant torque of 14.5 Nm while drawing a continuous current of 24.1 A. Power is provided to the MDD093B AC servo motor through a wire with a minimum diameter of 0.75 mm2, and the power connection is located on the motor's side B.

The model MDD093B-N-030-N2M-110GB1 is protected to IP65 standards, has an insulation class of F, and has a moment of inertia of 29 x 10^-4 kgm². This motor's windings have a temperature sensor to help control temperature and prevent overload damage, and it may be placed up to 1000 meters above sea level. The mode (MDD093B-N-030-N2M-110GB1) is equipped with a 0.5-kilogram holding brake that has clamping and release times of 20 and 60 milliseconds, respectively.