Product Description

The MDD093B-N-030-N2M-110GA2 is a servo motor with 3000 RPM nominal speed rating. It has a standard housing that allows motor operation with surface cooling and convection cooling. The IP65 rating for the motor is enabled by a sealed housing and sealed cable connectors. A power cable and a feedback cable terminate on the motor. Connectors for both cables have to be ordered separately. The power cable terminates on a power connection. The location for the power connection is specified by operators in the order. For the MDD093B-N-030-N2M-110GA2 motor the power connection is on side A. An integrated multiturn encoder enables digital servo feedback. Multiturn encoders require multiple shaft rotations before they can provide feedback. The motor sends feedback through the feedback cable to a drive controller. Feedback from the motor allows the controller to determine the amount by which it needs modify its output to bring motor parameters in line with requirements.

The MDD093B-N-030-N2M-110GA2 motor has a plain output shaft. Operators can order MDD motors with shafts that have a keyway and comply with DIN 6885-1. The keyway prevents relative rotation of the shaft and ensures effective torque transfer to the connected machine. Centering diameter of the MDD093B-N-030-N2M-110GA2 motor is 110 millimeters. MDD motor mounts via holes on the motor flange. The size of the flange on the MDD093B-N-030-N2M-110GA2 motor is 140 millimeters. The diameter of each mounting hole is 11 millimeters. Length of the motor housing is 327 millimeters. The diameter of the output shaft is 24 millimeters. An optional blocking brake is installed on the motor and is rated for 22 Nm holding torque. The mass of the brake is 1.1 kilograms and the mass of the servo moto is 16.5 kilograms.