Product Description

The KSM01.2B-071C-35N-S1-HG0-SE-NN-D7-NN-FW is a state-of-the-art KSM servo drive by Bosch Rexroth. Like other KMS drive controllers from Rexroth, the KSM01.2B-071C-35N-S1-HG0-SE-NN-D7-NN-FW is designed for pairing in tandem with the corresponding machine and not in a housing cabinet. This drive regulates heat by natural convection and comes with a hybrid-type electrical connector. It also has a plain shaft with a sealing ring. The KSM01.2B-071C-35N-S1-HG0-SE-NN-D7-NN-FW is devoid of a holding brake. It comes with a tri-colour LED indicator that depicts its status. A flashing green LED signifies an error-free drive operation, and a blinking red LED signifies the opposite.

The KSM01.2B-071C-35N-S1-HG0-SE-NN-D7-NN-FW has a maximum current rating of 17.7 Amperes. Its SCCR (short circuit current rating) has a value of 42000 A_rms. This KSM servo drive has a power rating of 1325 Watts at T > 10 minutes. The maximum speed and maximum torque of the KSM01.2B-071C-35N-S1-HG0-SE-NN-D7-NN-FW are 4700 rpm and 28 Nm respectively. In conformity with per DIN EN 60034-1, the insulation class of this unit is 155.

Prior to commissioning this equipment, any handling personnel must be aware of the safety and operating conditions required for optimal operations as stated by the manufacturer. Similarly, all ambient conditions must be adhered to as described by the relevant documentation, to avoid equipment damage, severe injuries, electric shock and potential health hazards. Also, the KSM01.2B-061C-35N-S1-HG0-SE-NN-D7-NN-FW has a capacitance of 0.024 mF in the DC bus. The diagnostic messages and drive status are sent to the S-0-0095 and displayed on its screen. In general, KSM distributed servo drives are specifically designed for mounting via their flanges, and the flange screw (M8) has a tightening torque rated at is 25 Nm. This unit can be shipped globally with a one-year warranty period from Wake Industrial.